Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Timberwolfd]

Okay another question?
Since I have 3 techs, I could technically have things going on at once on 3 separate mechs correct?
so with my newly acquired LRM 5 and ammo, I want to put it on my vindicator by removing 2 heat sinks and the med laser.
so the removal is just the 1x skill for removal, then what would be the 2x based on? Class B states that I can swap the LRM 5 with the med laser (due to same number of crit slots), but what about the addition of another ton of ammo?

Yes, you could be running 3 refits simultaneously.
Adding the ammo would be new equipment. I believe that is a class C refit off the top of my head.

[Ice]

its still a customization as well so it takes the custom penalty

[deadlyfire2345]

Okay How about just adding the LRM 5 in lieu of 1 HS and 1 Med laser? Would that still be considered a custom? sans the addition of another ton of ammo.

[Timberwolfd]

Unless it is a canon configuration it is custom.

[Ice]

paul anytime you change the mech outside of its normal load out its a customization...
only exceptions refit kits(not out until what 3050ish?), removing items, refitting mech back to original load out(as far as aware)

[deadlyfire2345]

okay okay fine. This works then. I will just remove 1 ML and 1 HS to add 1 LRM 5 to Vindicator. I just do not have my sheets on me at this time so I will have to add locations of each later.
Anyway Using Vet tech to remove 1 HS and 1 ML
Total Time: .875 TN:6 Start: 4/5/3045 Expeted End: 4/5/3045 (EoD)

Rolled 2d6 : 4, 3, total 7

[deadlyfire2345]

Removal roll passed
Changing ML to LRM-5 using Regular tech Megan Ellis
Start: 4/6/3045 Expected End 4/6/3045
Time: 240 Min     TN:8

Rolled 2d6 : 1, 2, total 3

[deadlyfire2345]

Based off Refit sheet, removal of the SHS and ML would require a TN: 5, rolled 7
Failed replacement roll (which was TN:9, but didn't matter either way)
Time: 480 End date: 4/16/3045.
Start date would be 4/16/3045 for addition since that is when I got the LRM 5 from Grasshopper.
BV for Vindicator Changes from 1024 to 1023.
New Total BV is 5260
Removed HS (RT) and Med Laser (Head)
Add LRM-5 (LT)

[deadlyfire2345]

Regular Maintenance (Month of May)
Grasshopper: (customizations by Megan Ellis 5/2-5/20)
Vindicator:  Tyler Andrews does regular maintenance from 5/1- 5/3/3045
Cicada: Tyler Andres Does Regular Maintenance from 5/4- 5/5/3045
Cataphract: Fred Bishop does regular maintenance from 5/1-5/3/3045

[deadlyfire2345]

Elite Tech Tyler Andrews will remove 320SFE from Cicada (TN5)
Start date: 6/1/3045
End Date(expected): 6/3/3045

Rolled 2d6 : 4, 1, total 5

[deadlyfire2345]

Using refit excel sheet. the removal of 320 SFE required a TN: 3 using elite tech. Rolled 5.
Removal of 320 SFE from Cicada Passed, will be removed by 6/3/3045

[deadlyfire2345]

Elite Tech Tyler Andrews will remove 4T Gyro from Cicada in Factory (TN:5)
Start Time 6/4/3045
End Time (Expected): 6/7/3045 (Assuming we are planetbound due to customizations of other players)

Rolled 2d6 : 3, 2, total 5

[deadlyfire2345]

Removal of Gyro from Cicada Success.
 4T Gyro in inventory on 6/7/3045

[deadlyfire2345]

6/1/3045
Cataphract required maintenance (22 Hours) will be done by Fred Bishop
Grasshopper required maintenance (22 hours) will be done by Megan Ellis
Vindicator required maintenance (17 Hours) will be done by Beth Henderson
End: 6/3/3045 for all 3

[deadlyfire2345]

With the T-bolt assigned to me, I will remove its 3T gyro with Veteran tech (TN6)
Start date: 6/4/3045
End date (expected): 6/7/3045

Rolled 2d6 : 2, 4, total 6