1
General Discussion / Adepticon 2023 Shopping
« on: March 04, 2023, 11:06:44 PM »
Is anyone wanting anything from Adepticon from either Catalyst or other vendors?
CincyBattletech
- May 20, 2024, 02:40:20 PM
- Welcome, Guest
News:
Reactor: Online. Sensors: Online. Weapons: Online. All systems nominal.
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
2
General Discussion / 3d Print requests
« on: February 14, 2023, 11:10:04 PM »
3d Print Requests
Please reply with what you want 3D Printed. If you know which STL you are specifically wanting printed, please post a link - if not I will coordinate with you.
Please reply with what you want 3D Printed. If you know which STL you are specifically wanting printed, please post a link - if not I will coordinate with you.
3
General Discussion / Printer Queue
« on: February 14, 2023, 10:36:48 PM »
I'll be updating the 3d Printer queue on a weekly basis (hopefully)
Ender 3 S - High resolution - Working, downtime needed soon for recalibration/refit.
4 AC/MG turrets
three MFBs
4x dump trucks
Heliopolis
2x Partisan
1x Zhukov
Ender 3 S - High resolution - Working, downtime needed soon for recalibration/refit.
4 AC/MG turrets
three MFBs
4x dump trucks
Heliopolis
2x Partisan
1x Zhukov
4
General Discussion / Resin 3d Printer?
« on: December 15, 2022, 09:51:52 PM »
It was recently brought to my attention that Elegoo has a printer on sale for about 135USD - (https://www.elegoo.com/products/elegoo-mars-2-pro-mono-lcd-3d-printer)
I know there's people who don't like the current looks of certain minis or were sculpted 30 years ago and haven't been updated in white metal or plastic, BUT people have made STLs of the same machine (The Avatar comes to mind...)
Any thoughts on this?
We also have access to an FDM printer now but FDM is somewhat limited in what minis it can print off (But man its good at paint racks!)
I know there's people who don't like the current looks of certain minis or were sculpted 30 years ago and haven't been updated in white metal or plastic, BUT people have made STLs of the same machine (The Avatar comes to mind...)
Any thoughts on this?
We also have access to an FDM printer now but FDM is somewhat limited in what minis it can print off (But man its good at paint racks!)
5
General Discussion / Guess which moron forgot the website bill?
« on: August 15, 2022, 10:40:31 PM »
So, August came and the website didn't expire for a pleasant change! The bill this year was for 134USD - it has been paid in full so the website will stay up for a change.
I won't be there this weekend (YAY WORK!) so you know...handle it amongst yourselves.
I won't be there this weekend (YAY WORK!) so you know...handle it amongst yourselves.
6
Lance Maintenance and Customizations / Norrbotten Lance Reapirs/Mods/Pod Swaps
« on: July 22, 2022, 10:09:47 PM »
Norrbotten Lance will attempt to add Omnipod capacity to the following:
5x DHS
2x LPL
3x MPLS
5x DHS
Veteran Tech assigned to this task.
5x DHS
Base time 270 EA, +2 Base - 3 quad time TN5 each attempt takes 2 days. Each one is 1500CB
9
10
10
7
9
Veteran tech will attempt to pod 2x LPL. Each attempt 3 days.
360 minutes EA, +2 Base -3 quad time TN5, EA 43750 CB
8
7
Veteran tech attempts to pod out 3x MPL
Each attempt will take 3 days.
360 minutes EA, +2 Base -3 quad time TN5, EA 15000CBills
9
3
8
One failure, attempt again
5
155K Cbills total.
*+2 Tech roll modifier (may be modified by Extra Time or Rush Job)
**360 total minutes of Tech time for a Weapon (may be modified by Extra Time or Rush Job)
**270 minutes of Tech time for a piece of non-Weapon Equipment (may be modified by Extra Time or Rush Job)
**REQUIRES a Basic Facility, and the Maintenance Bay Location Bonus to Tech rolls does not apply
**A number of C-bills equal to 1/4th the cost of the weapon or equipment being made Pod-capable
5x DHS
2x LPL
3x MPLS
5x DHS
Veteran Tech assigned to this task.
5x DHS
Base time 270 EA, +2 Base - 3 quad time TN5 each attempt takes 2 days. Each one is 1500CB
9
10
10
7
9
Veteran tech will attempt to pod 2x LPL. Each attempt 3 days.
360 minutes EA, +2 Base -3 quad time TN5, EA 43750 CB
8
7
Veteran tech attempts to pod out 3x MPL
Each attempt will take 3 days.
360 minutes EA, +2 Base -3 quad time TN5, EA 15000CBills
9
3
8
One failure, attempt again
5
155K Cbills total.
*+2 Tech roll modifier (may be modified by Extra Time or Rush Job)
**360 total minutes of Tech time for a Weapon (may be modified by Extra Time or Rush Job)
**270 minutes of Tech time for a piece of non-Weapon Equipment (may be modified by Extra Time or Rush Job)
**REQUIRES a Basic Facility, and the Maintenance Bay Location Bonus to Tech rolls does not apply
**A number of C-bills equal to 1/4th the cost of the weapon or equipment being made Pod-capable
7
Warehouse Rolls / Norrbotten Lance Warehouse
« on: July 22, 2022, 03:06:53 PM »
Desire to acquire a LPL
Base TN11:
Scrounge -1
Cash layout -3
final TN7
Rolled 10 acquired, arriving May 22
Base TN11:
Scrounge -1
Cash layout -3
final TN7
Rolled 10 acquired, arriving May 22
8
Have `Mech, Will Travel: The Next Generation / Norbotten lance creation
« on: July 01, 2022, 08:08:40 PM »
Norbotten creation
9
General Discussion / Adepticon 2022
« on: March 22, 2022, 09:10:30 PM »
Does anyone have anything they'd like me to get from adepticon?
10
General Discussion / Demo team agent passing
« on: March 20, 2022, 10:42:36 PM »
Gang, for those of you who were not aware, the demo team XO, Craig Gulledge, passed away a few days ago from a vehicular accident. If you were a regular at the convention scene, yeah, you've known him several times as the big scotsman with the braided beard.
I can safely say his generosity saved several people over the years and all he ever wanted was for you to pay it forward.
Memorial information to come when/if available.
I can safely say his generosity saved several people over the years and all he ever wanted was for you to pay it forward.
Memorial information to come when/if available.
11
General Discussion / Rooney The Dog
« on: November 01, 2021, 01:07:40 PM »
I know a lot of you are fond of him - it is likely we will be saying goodbye to him in the coming days. If you'd like to say goodbye shoot me a text or a message, sooner than later
-pope.
-pope.
12
General Discussion / Outage 12/18/20
« on: December 18, 2020, 10:22:18 AM »
Hosting provider had an outage this morning, nothing I did.
13
General Discussion / MW: Destiny
« on: July 22, 2020, 04:35:03 PM »
How much interest is there in starting a Destiny series of something or others to give us something to do while waiting out the end times?
14
General Discussion / Website 2020 - 2021 bill
« on: July 16, 2020, 06:23:27 PM »
Our bill for the next year of hosting is coming due soon - while I have not found my email bill yet (probably in spam somewhere to be honest) 130 is a good safe bet.
Please let me know if you send money to the paypal account or have sent funds already there.
Thank you.
Please let me know if you send money to the paypal account or have sent funds already there.
Thank you.